User's Manual

50 Using the System
4. Press the USER key.
When the Ready is displayed in line 1 of the LCD panel, the printer is
ready.
Use the Printer Manager
The system includes the Printer Manager, which displays information about the
system and card production in a Web browser window. Your administrator or
installer uses it to set up the advanced features of the system components and to
work with a service provider when troubleshooting card production issues.
For mor information about specific tasks available to the end user, see the
Solutions Guide (Part No. 539998).
1. Make sure that the LCD Panel displays Ready.
2. Obtain the printer Network IP Address or the USB IP Address and write it
down.
3. Open a Web Browser on the PC.
4. In the Address area of the browser, enter the following:
https://printer IP address
For example: https://123.1.23.123 where 123.1.23.123 is replaced by the
printer IP address.
5. Press the E
NTER key.
6. Select the language in which to display the Printer Manager session from the
left-hand column.
7. In the P
LEASE LOG IN area
select a Username and
enter a password (if
required).
A. Select a Username that
best matches your job
responsibility. Options
are:
• WebUser