User's Manual
Table Of Contents
- Cover
- Contents
- 1 Welcome to the Card Personalization System
- 2 Installation Requirements
- 3 Install the System
- 4 Using the System
- 5 Card Design
- 6 System Maintenance
- 7 Troubleshooting
- Tools for Troubleshooting
- Locating the Issue
- Installation Troubleshooting
- Card Appearance
- Magnetic Stripe
- Card Jam
- Messages and Conditions
- Respond to Messages
- Printer Component Messages (100-124)
- 100: Request not supported
- 101: Job could not complete
- 102: Card not in position
- 103: Printer problem
- 104: Critical problem
- 105: Magstripe data error
- 106: Magstripe data not found
- 107: Magstripe read data error
- 108: Magstripe read no data
- 111: Card not picked
- 112: Hopper Empty
- 113: Close cover to continue
- 114: Cover opened during job
- 116: Magstripe not available
- 117: Reader not available
- 120: User paused the printer
- 122: Magnetic stripe format problem
- 123: Insert new card then continue
- 124: Insert same card then continue
- Embosser Component Messages (125-151)
- 125: Emboss critical issue
- 126: Emboss format issue
- 127: Emboss transport error
- 128: Embosser card jam
- 129: Embosser topper jam
- 130: Embosser card entry jam
- 131: Embosser card exit jam
- 132: Embosser card stack full
- 133: Embosser card reject full
- 135: Indent ribbon supplies out
- 136: Indent ribbon break
- 137: Embosser wheel error
- 138: Embosser indent error
- 139: Lost card, open emboss cover
- 140: Embosser not available
- 141: Close emboss cover
- 142: Emboss cover error
- 143: Topper ribbon problem
- 144: Topper ribbon out
- 145: Topper ribbon type problem
- 146: Topper ribbon support err.
- 147: Topper ribbon no tag found
- 149: Option not installed
- Printer Component Messages (100-124)
- 8 Supplies and Parts
- 9 Legal Notices
iii
Contents
Chapter 1: Welcome to the Card Personalization System_____________________________ 1
The CE870 Card Personalization System _________________________________________ 1
About the System ______________________________________________________________ 2
System Components ___________________________________________________________ 3
The Printer Component (Top, Front and Right Side) ___________________________ 3
Printer Multi-Card Hopper _______________________________________________ 4
Printer Connections (Left Side)___________________________________________ 5
The Touch Screen Component (Optional) ___________________________________ 6
The Embosser Component (Top, Front and Right Side) ________________________ 7
Inside the Embosser _____________________________________________________ 8
Embosser Connections (Back and Left Side) ______________________________ 9
System Labels_________________________________________________________________ 10
Printer Configuration Label_________________________________________________ 10
Embosser Configuration Label______________________________________________ 11
How To Topics_________________________________________________________________ 12
Chapter 2: Installation Requirements_______________________________________________ 13
PC Requirements______________________________________________________________ 13
Site Requirements _____________________________________________________________ 14
Electrical Requirements _______________________________________________________ 15
Chapter 3: Install the System ______________________________________________________ 17
Secure the System ____________________________________________________________ 18
Assemble the Printer and Embosser ____________________________________________ 19
Load Supplies_________________________________________________________________ 20
Load Indent Ribbon Cartridge _____________________________________________ 20
Load Topping Foil Cartridge________________________________________________ 21
Load Cleaning Sleeve _____________________________________________________ 22
Load Cards in Hopper _____________________________________________________ 24
Connect Cables ______________________________________________________________ 25
Connect Data Cables _____________________________________________________ 25
Connect Power Cables ____________________________________________________ 26
Power on the System ______________________________________________________ 27
Run Test Card _________________________________________________________________ 28
Chapter 4: Using the System_______________________________________________________ 29
Process Cards ________________________________________________________________ 29
How the Card Travels ______________________________________________________ 30
About Secure Encryption __________________________________________________ 31
Use the Touch Screen _________________________________________________________ 31
Use the Front Panel____________________________________________________________ 32
Power Button______________________________________________________________ 32
LCD Panel ________________________________________________________________ 32
User Button and Light ______________________________________________________ 33
Down Arrow, Up Arrow, and Enter Keys _____________________________________ 33