User's Manual

XPS Card Printer Installation and User Guide 116
How to Install a Large Output Hopper
The output hopper included with
the printer holds about 25 cards.
The printer can be used with an
optional large output hopper
that holds up to 100 cards.
The large output hopper kit
includes two base sections and a
large output hopper. The two
base sections are the same; turn
them back to back to use them.
Each base has hooks, marked by
green circles, to attach it to the
printer base.
You can remove the standard
hopper and attach the large output hopper without using tools.
Follow the steps in this topic to attach the printer to the bases, and to install the larger output
hopper.
1. Position one base section with the open
end facing the back of the printer.
2. Lift the printer over the base section.
3. Align the tabs in the base with the slots in
the bottom of the printer.
4. Push up (a) to insert the four tabs in the
slots and then push the base forward (b) to lock it to the
printer.
5. Position the other base section with the opening to the front
of the printer.