User's Manual

XPS Card Printer Guide
About the Printer
Using the Printer
Card Design and Setup
Printer Driver
Communciation
with the Printer
Driver Messages
USB Connection
Network
Connection
Using the Driver
Permissions
Printing Cards
Troubleshooting
Supplies and Parts
Installation Guide
Messages
The driver can display the following messages.
Message 500: The printer is not available. The card cannot print.
The driver cannot communicate with the printer. Make
sure the printer is powered on and connected to the PC.
1. Connect the power cord. Use the power switch to
power on the printer.
2. Connect the cables from the PC to printer.
Use a USB cable(a) OR a network cable (b),
NOT both.
Make sure all connections are complete.
3. Ask network support for help, if needed.
Message 501: The printer connection was
lost. Printing the card is canceled.
The printer connection was lost. Printing the card is
canceled.
To print the card, make sure the printer is powered on
and connected to the PC.
1. Connect the power cord. Use the power switch to
power on the printer.
2. Connect the cables from the PC to printer.
Use a USB cable(a) OR a network cable (b),
NOT both.
Hints & Tips
Make sure you have chosen the
correct printer in the application.
Ask the Administrator for assistance if
needed.
XPS Card Printer Guide
DRAFT
2/22
Datacard Confidential
Page 58
SHORT TERM CONFIDENTIAL