User's Manual

Message 122: Magstripe format problem
The magstripe data sent does not match the format set
in the printer.
Ask your administrator for information about the
data to send.
Message 123: Insert new card then continue
The card requires you to insert a new card in the
exception slot.
13. 1. Insert the card in the printer.
2. Resume.
Message 124: Insert same card then continue
The card must be turned by hand to print the second side.
Magstripe format not the same
Hints & Tips
The printer has format settings for the
data that can be encoded on the card.
The magstripe data sent does not
match those settings.
Ask the Administrator to verify that
the card, the data, and the printer
settings match.
See
Card Design> Magnetic Stripe for
information about data allowed for
specific formats.
Hints & Tips
Make sure to use the correct type of
new card for this job.
Do not touch the card
surface to be printed:
Handle cards by their
edges
Wear gloves
XPS Card Printer Guide
DRAFT
2/22
Datacard Confidential
Page 30
SHORT TERM CONFIDENTIAL