User's Manual

hopper.
2. Insert cards in the input hopper.
3. Close the hopper and resume.
Message 113:
Close cover to
continue
The printer cover must be closed to print.
11. 1. Close the cover.
2. Push down on the corners of the cover to latch it.
Message 114: Cover opened during job
The printer cover must be closed to print.
12. 1. Close the cover.
2. Push down on the corners of the cover to latch it.
Load cards in the input hopper
Hints & Tips
Orient all cards the same way.
Do not touch the card surface to be
printed:
Handle cards by their edges
Wear gloves
Close the cover
Hints & Tips
Make sure the ribbon cartridge is
installed and the handle is even with
the edges of the printer.
XPS Card Printer Guide
DRAFT
2/22
Datacard Confidential
Page 26
SHORT TERM CONFIDENTIAL