User's Manual
Table Of Contents
XPS Card Printer Guide
About the Printer
Using the Printer
Load Supplies
Connect the
Power Cord
Power on the
Printer
Connect the
Data Cable
Use the Front
Panel
Respond to
Conditions
LCD Menus
Cleaning Card
Card Design and Setup
Printer Driver
Printing Cards
Troubleshooting
Supplies and Parts
Installation Guide
Respond to Conditions or Messages
When the printer cannot process the card sent, it issues a condition. Conditions are displayed on
the LCD of the Front Panel. In most cases, the Windows driver also displays the condition as a
message. See
Driver Messages for information about the messages the driver displays.
Message 100: Request not supported
To print the card:
Change the data to match printer features and settings.
Send the new card to print again.
Message 101: Job could not complete
The card took too much time. To print the card again:
Make sure all data for the card is available.
Send the card to print again.
Hints & Tips
The card, if it started to print, should
be discarded.
Make sure you have chosen the
correct printer in the application.
Ask the Administrator for assistance if
needed.
Hints & Tips
The card, if it started to print, should
be discarded.
Make sure that data, such as a photo,
is on the PC before printing. If you
are connected to a database, verify
the connection.
Ask the Administrator for assistance if
XPS Card Printer Guide
DRAFT
2/22
Datacard Confidential
Page 20
SHORT TERM CONFIDENTIAL