Product Info
Table Of Contents
- SP Series Info Central
- What do you want to do?
- Answer questions you have about using the printer
- What is “Smart Driver™”?
- Do I have to use the Smart Driver™?
- How do I obtain Technical Support?
- About Info Central
- Accessing Info Central and Help
- Navigating in Info Central
- Printing
- 1 Begin with the topic displayed in the right-hand pane.
- 2 Make sure that all items in the topic that you want to print are displayed. For example, drop-down hotspots must be expanded if you want them on the printout.
- 3 Click Print.
- 4 Select “Print the selected topic” and click OK.
- 1 Begin with the Contents tab displayed and select the book you want to print.
- 2 Make sure that all items in the topics in the book that you want to print are displayed. For example, go to each topic to expand drop-down hotspots if you want them on the printout.
- 3 Click Print.
- 4 Select “Print the selected heading and all subtopics” and click OK.
- Learn more about tasks, such as installation, setup, or maintenance
- Solve problems with printing
- Access an online version of the Printer Guide
- Access online information about the Built-in Ethernet Options
- Open help for Properties or Printing Preferences
- Open help for the Printer Toolbox and Messages
- Safety and compliance (FCC)
- Regulatory compliance
- Liability statement
- Safety
- Acknowledgments
12
SP Series Info Central
Notice to Users of All SP Series Printers
The printer emits radio-frequency waves and must be used as installed and recommended by Datacard®, the
printer manufacturer. You may not modify the printer or how it is used without the written permission of Datacard®.
You may not operate the printer after modifying it or its method of operation.
Notice to Users of Printers Equipped with Contactless Smart Card Coupler
The contactless smart card coupler emits radio-frequency waves and must be used as installed and recommended
by Datacard®, the printer manufacturer. You may not modify the coupler or how it is used without the written
permission of Datacard®. You may not operate the printer after modifying the coupler or its method of operation.
Liability statement
This Datacard® product has been built to the high standards of Datacard® Corporation (doing business as
Datacard® Group). Please note and heed the WARNING and CAUTION labels that have been placed on the
equipment for your safety. Please do not attempt to operate or repair this equipment without adequate training. Any
use, operation or repair in contravention of this document is at your own risk. By acceptance of this system you
hereby assume all liability consequent to your use or misuse of this equipment. Datacard® Corporation assumes no
liability for incidental, special or consequential damage of any kind. Equipment specifications, applications and
options are subject to change at the sole discretion of Datacard® Corporation without notice.
Safety
All Datacard® products are built to strict safety and reliability specifications in accordance with UL60950 and
Canadian requirements, and the Low Voltage Directive 73/23/EEC. Therefore, safety issues pertaining to operation
and repair of Datacard® equipment are primarily environmental and human interface.
The following basic safety tips are given to ensure safe installation, operation and maintenance of Datacard®
equipment and are not to be considered as comprehensive on all matters of safety.
Safe environment
• Connect equipment to a grounded facility power source. Do not defeat or bypass the ground lead.
• Place the equipment on a stable surface (table) and ensure floors in the work area are dry and non-slip.
Insulated rubber floor mats are preferred.
• Know the location of equipment branch circuit interrupters or circuit breakers and how to turn them on and off in
case of emergency.
• Know the location of fire extinguishers and how to use them. ABC type extinguishers may be used on electrical
fires.
• Know local procedures for first aid and emergency assistance at the customer facility.
• Use adequate lighting at the equipment.
• Maintain the recommended range of temperature and humidity in equipment area.
Safe human interface
• Use proper lifting techniques when moving or installing the equipment.
• Use standard electrostatic discharge (ESD) precautions when working on or near electrical circuits.
• Do not defeat or disconnect safety interlocks on covers. Operate the printer with the cover closed.
Acknowledgments
Microsoft, Windows NT, and Windows are trademarks or registered trademarks of Microsoft Corporation.
Select, Magna, Express, Advanced Imaging Technology, Platinum, Smart Driver, Preface, TruImage, and
StickiCard are trademarks of Datacard Corporation in the United States and/or other countries. Datacard, ID
Works, DuraGard, ImageCard, and UltraGrafix are registered trademarks of Datacard Corporation in the United
States and/or other countries. PartnerPage is a service mark of Datacard Corporation in the United States and/or