Product Info
Table Of Contents
- SP_Info_Central.book
- SP Series Info Central
- What do you want to do?
- Answer questions you have about using the printer
- Learn how to use this online information
- Learn more about tasks, such as installation, setup, or maintenance
- Solve problems with printing
- Access an online version of the Printer Guide
- Open help for the Printer Toolbox and Messages
- Open help for Properties or Printing Preferences
- Safety and compliance (FCC)
- Acknowledgments
- SP Series Info Central
- SP_Install_e-guide.book
- Installation
- Before you install
- Install the printer
- Installing the driver
- Upgrading the driver
- Reinstalling the driver
- Troubleshooting Installation Problems
- PC port settings
- Connecting more than one printer or more than one PC
- On the CD-ROM
- Installation
- SP_Setup_e-guide.book
- Setting up for your card design
- How do I create a card design?
- What is a card design?
- When should I perform setup tasks?
- What do I use to set up the printer?
- Why are there several interfaces to set up the printer?
- Card design checklist
- Working with Properties and Printing Preferences
- Changing the type of print ribbon
- Set up for monochrome (K) printing
- Color settings
- Changing settings in the printer
- Magnetic Stripe Setup
- Smart card setup
- Setting up for your card design
- SP_Production_e-guide.book
- SP_Supplies_e-guide.book
- SP_Troubleshooting_e-guide.book
16
SP Series Info Central: Setup Guide
6 Use a permanent marker to mark the back of the card with a 2 (or the next number if repeating these
steps).
– If you printed the sample card from the Color Settings tab, the current settings are printed on the
card.
– If you printed the sample card from the card creation application, record the new Contrast setting on
the card.
7 Evaluate the appearance of the sample card(s).
8 Repeat these steps until the sample cards meet your requirements.
How do I make the dark colors darker and the light colors lighter?
1 After making a sample card, click on the pointer in the Contrast box.
2 Drag the slider to the new position. Move it to the right to increase the difference between light and
dark colors.
3 Wait a moment while the Color Image Preview changes to show the effect of the new setting.
4 If preview shows the change you want, click the Apply Changes button. If not, return to step 2.
5 Print a sample card, using the same method as you used previously.
– In the card creation application, print one or more sample cards.
– Click the Print Sample Card button to print a card.
6 Use a permanent marker to mark the back of the card with a 2 (or the next number if repeating these
steps).
– If you printed the sample card from the Color Settings tab, the current settings are printed on the
card.
– If you printed the sample card from the card creation application, record the new Contrast setting on
the card.
7 Evaluate the appearance of the sample card(s).
8 Repeat these steps until the sample cards meet your requirements.
How do I make the printed cards less fuzzy?
1 After making a sample card, click on the pointer in the Sharpness box.
2 Drag the slider to the new position. Drag the slider to the right to increase sharpness.
3 Wait a moment while the Color Image Preview changes to show the effect of the new setting.
4 If preview shows the change you want, click the Apply Changes button. If not, return to step 2.
5 Print a sample card, using the same method as you used previously.
– In the card creation application, print one or more sample cards.
– Click the Print Sample Card button to print a card.
6 Use a permanent marker to mark the back of the card with a 2 (or the next number if repeating these
steps).
– If you printed the sample card from the Color Settings tab, the current settings are printed on the
card.