Product Info
Table Of Contents
- SP_Info_Central.book
- SP Series Info Central
- What do you want to do?
- Answer questions you have about using the printer
- Learn how to use this online information
- Learn more about tasks, such as installation, setup, or maintenance
- Solve problems with printing
- Access an online version of the Printer Guide
- Open help for the Printer Toolbox and Messages
- Open help for Properties or Printing Preferences
- Safety and compliance (FCC)
- Acknowledgments
- SP Series Info Central
- SP_Install_e-guide.book
- Installation
- Before you install
- Install the printer
- Installing the driver
- Upgrading the driver
- Reinstalling the driver
- Troubleshooting Installation Problems
- PC port settings
- Connecting more than one printer or more than one PC
- On the CD-ROM
- Installation
- SP_Setup_e-guide.book
- Setting up for your card design
- How do I create a card design?
- What is a card design?
- When should I perform setup tasks?
- What do I use to set up the printer?
- Why are there several interfaces to set up the printer?
- Card design checklist
- Working with Properties and Printing Preferences
- Changing the type of print ribbon
- Set up for monochrome (K) printing
- Color settings
- Changing settings in the printer
- Magnetic Stripe Setup
- Smart card setup
- Setting up for your card design
- SP_Production_e-guide.book
- SP_Supplies_e-guide.book
- SP_Troubleshooting_e-guide.book
26
SP Series Info Central
If the Resources tab shows conflicts, select another configuration or change the settings for the port,
following port instructions.
9 Click OK on the Properties dialog box and on the System Properties dialog box to save settings and
close the dialog boxes.
Serial port settings
This section describes how to set serial port values A serial port might be used with a smart card
module.
For some smart card applications, you connect the PC to the serial port on the printer. The PC should
be set to match the printer serial port settings.
If you use a contact station with the printer, see the information about the contact station for port
settings.
Setting the serial port on Windows 2000
1 From the Control Panel, select Ports.
2 From the Ports dialog box, select the port, such as COM1 or COM2.
3 Select the Settings button to display the port settings.