Product Info
Table Of Contents
- SP_Info_Central.book
- SP Series Info Central
- What do you want to do?
- Answer questions you have about using the printer
- Learn how to use this online information
- Learn more about tasks, such as installation, setup, or maintenance
- Solve problems with printing
- Access an online version of the Printer Guide
- Open help for the Printer Toolbox and Messages
- Open help for Properties or Printing Preferences
- Safety and compliance (FCC)
- Acknowledgments
- SP Series Info Central
- SP_Install_e-guide.book
- Installation
- Before you install
- Install the printer
- Installing the driver
- Upgrading the driver
- Reinstalling the driver
- Troubleshooting Installation Problems
- PC port settings
- Connecting more than one printer or more than one PC
- On the CD-ROM
- Installation
- SP_Setup_e-guide.book
- Setting up for your card design
- How do I create a card design?
- What is a card design?
- When should I perform setup tasks?
- What do I use to set up the printer?
- Why are there several interfaces to set up the printer?
- Card design checklist
- Working with Properties and Printing Preferences
- Changing the type of print ribbon
- Set up for monochrome (K) printing
- Color settings
- Changing settings in the printer
- Magnetic Stripe Setup
- Smart card setup
- Setting up for your card design
- SP_Production_e-guide.book
- SP_Supplies_e-guide.book
- SP_Troubleshooting_e-guide.book
17
SP Series Info Central
All card data is positioned
unevenly on the card.
The Long Edges setting might be
incorrect.
Change the Long Edges setting
on the Edge to Edge tab of the
Printer Toolbox.
If the problem persists, contact
your service provider.
One front-side margin (on a
long edge) is larger than the
other. This might appear as
one edge of the card being
unprinted.
The print ribbon spools are not
pushed completely onto the
cartridge spindles.
Push each print ribbon spool
onto its spindle until it clicks into
place.
If the problem persists, contact
your service provider.
Printed cards are too dark. The power supply is not the one
supplied with the printer from the
factory.
The printhead has been
changed.
The card thickness or type cards
have changed.
Use the factory-supplied power
supply or change the intensity
settings.
Change the brightness setting.
Change the brightness setting.
Change the intensity for
monochrome (K) or topcoat.
The card is printed upside
down (the image is rotated
180 degrees).
The card creation application has
rotated the card.
The SmartDriver card rotation
setting might be incorrect.
See the information for the card
creation application.
Set the card rotation using the
Properties (98 and Me) or
Printing Preferences (2000 or
XP) dialog box.
What you see Possible causes Solutions