Product Info
Table Of Contents
- SP_Info_Central.book
- SP Series Info Central
- What do you want to do?
- Answer questions you have about using the printer
- Learn how to use this online information
- Learn more about tasks, such as installation, setup, or maintenance
- Solve problems with printing
- Access an online version of the Printer Guide
- Open help for the Printer Toolbox and Messages
- Open help for Properties or Printing Preferences
- Safety and compliance (FCC)
- Acknowledgments
- SP Series Info Central
- SP_Install_e-guide.book
- Installation
- Before you install
- Install the printer
- Installing the driver
- Upgrading the driver
- Reinstalling the driver
- Troubleshooting Installation Problems
- PC port settings
- Connecting more than one printer or more than one PC
- On the CD-ROM
- Installation
- SP_Setup_e-guide.book
- Setting up for your card design
- How do I create a card design?
- What is a card design?
- When should I perform setup tasks?
- What do I use to set up the printer?
- Why are there several interfaces to set up the printer?
- Card design checklist
- Working with Properties and Printing Preferences
- Changing the type of print ribbon
- Set up for monochrome (K) printing
- Color settings
- Changing settings in the printer
- Magnetic Stripe Setup
- Smart card setup
- Setting up for your card design
- SP_Production_e-guide.book
- SP_Supplies_e-guide.book
- SP_Troubleshooting_e-guide.book
15
SP Series Info Central: Production e-Guide
4 Press in the printhead latch (step 1 in the illustration above) and push up on the printhead cartridge to
seat it in the cradle. (step 2 in the illustration above). Release the printhead latch when the printhead
cartridge is in place.
5 Clean the printhead. Move the cleaning pen back and forth along the length of the printhead edge. Be
sure to completely clean the rounded edge of the printhead.
6 Close the printer cover, pressing down on the blue edge to latch it.
7 Plug in the printer to power on the printer.
8 Print a card to verify the quality of printing. You can print a sample card or a card using your card
creation application.
9 If needed, fine tune edge to edge settings to center the printed image with the new printhead cartridge.
See Fine tune edge to edge printing for steps to follow.