Product Info
Table Of Contents
- SP_Info_Central.book
- SP Series Info Central
- What do you want to do?
- Answer questions you have about using the printer
- Learn how to use this online information
- Learn more about tasks, such as installation, setup, or maintenance
- Solve problems with printing
- Access an online version of the Printer Guide
- Open help for the Printer Toolbox and Messages
- Open help for Properties or Printing Preferences
- Safety and compliance (FCC)
- Acknowledgments
- SP Series Info Central
- SP_Install_e-guide.book
- Installation
- Before you install
- Install the printer
- Installing the driver
- Upgrading the driver
- Reinstalling the driver
- Troubleshooting Installation Problems
- PC port settings
- Connecting more than one printer or more than one PC
- On the CD-ROM
- Installation
- SP_Setup_e-guide.book
- Setting up for your card design
- How do I create a card design?
- What is a card design?
- When should I perform setup tasks?
- What do I use to set up the printer?
- Why are there several interfaces to set up the printer?
- Card design checklist
- Working with Properties and Printing Preferences
- Changing the type of print ribbon
- Set up for monochrome (K) printing
- Color settings
- Changing settings in the printer
- Magnetic Stripe Setup
- Smart card setup
- Setting up for your card design
- SP_Production_e-guide.book
- SP_Supplies_e-guide.book
- SP_Troubleshooting_e-guide.book
14
SP Series Info Central: Production e-Guide
Replace the printhead cartridge
1 Position the printhead cartridge with the silver label toward you and on top. Place the printhead cable
behind the cartridge so the plug is visible through the opening in the printhead cartridge.
2 Carefully align the plug with the receptacle on the printhead. Push the plug all the way onto the
receptacle (see the following illustration).
3 Align the printhead cartridge pins with the printhead cartridge slots on the cover arm (see the following
illustration).