Product Info
Table Of Contents
- SP_Info_Central.book
- SP Series Info Central
- What do you want to do?
- Answer questions you have about using the printer
- Learn how to use this online information
- Learn more about tasks, such as installation, setup, or maintenance
- Solve problems with printing
- Access an online version of the Printer Guide
- Open help for the Printer Toolbox and Messages
- Open help for Properties or Printing Preferences
- Safety and compliance (FCC)
- Acknowledgments
- SP Series Info Central
- SP_Install_e-guide.book
- Installation
- Before you install
- Install the printer
- Installing the driver
- Upgrading the driver
- Reinstalling the driver
- Troubleshooting Installation Problems
- PC port settings
- Connecting more than one printer or more than one PC
- On the CD-ROM
- Installation
- SP_Setup_e-guide.book
- Setting up for your card design
- How do I create a card design?
- What is a card design?
- When should I perform setup tasks?
- What do I use to set up the printer?
- Why are there several interfaces to set up the printer?
- Card design checklist
- Working with Properties and Printing Preferences
- Changing the type of print ribbon
- Set up for monochrome (K) printing
- Color settings
- Changing settings in the printer
- Magnetic Stripe Setup
- Smart card setup
- Setting up for your card design
- SP_Production_e-guide.book
- SP_Supplies_e-guide.book
- SP_Troubleshooting_e-guide.book
13
SP Series Info Central: Production e-Guide
Replacing the printhead cartridge
The printer uses an operator-replaceable printhead cartridge. For more information about printhead
cartridges, see the Supplies e-Guide.
Remove the printhead cartridge
Do not touch the printing edge of the printhead cartridge. If you do, clean it using the cleaning pen, as
described in Cleaning the printhead.
Do not bump the printing edge of the printhead cartridge with any sharp objects. Sharp objects can
permanently damage the printhead.
1 Power off the printer.
2 Open the printer cover.
3 Place your hand under the printhead cartridge because it will move down when released.
4 Press the printhead latch away from you to release the printhead cartridge.
5 Pull on plug and cables to remove the printhead cable.