Product Info
Table Of Contents
- SP_Info_Central.book
- SP Series Info Central
- What do you want to do?
- Answer questions you have about using the printer
- Learn how to use this online information
- Learn more about tasks, such as installation, setup, or maintenance
- Solve problems with printing
- Access an online version of the Printer Guide
- Open help for the Printer Toolbox and Messages
- Open help for Properties or Printing Preferences
- Safety and compliance (FCC)
- Acknowledgments
- SP Series Info Central
- SP_Install_e-guide.book
- Installation
- Before you install
- Install the printer
- Installing the driver
- Upgrading the driver
- Reinstalling the driver
- Troubleshooting Installation Problems
- PC port settings
- Connecting more than one printer or more than one PC
- On the CD-ROM
- Installation
- SP_Setup_e-guide.book
- Setting up for your card design
- How do I create a card design?
- What is a card design?
- When should I perform setup tasks?
- What do I use to set up the printer?
- Why are there several interfaces to set up the printer?
- Card design checklist
- Working with Properties and Printing Preferences
- Changing the type of print ribbon
- Set up for monochrome (K) printing
- Color settings
- Changing settings in the printer
- Magnetic Stripe Setup
- Smart card setup
- Setting up for your card design
- SP_Production_e-guide.book
- SP_Supplies_e-guide.book
- SP_Troubleshooting_e-guide.book
10
SP Series Info Central: Production e-Guide
• Click the Clean Printer button in the Printer Toolbox. Click OK on the prompt that appears. Do not
insert a cleaning card! The driver sends a command to the printer to run the printer cleaning
card. The printer moves rollers when it attempts to pick the card.
• Turn the card advance knob to move rollers by hand.
d Move the pen on the roller.
e Lightly wipe any dirt from the end of the cleaning pen onto a clean cloth or paper. Move the
cleaning pen to another area of the roller. (Click Cancel on the “Card not picked” message if it
appears.)
f Repeat steps c through e for the roller at location 5 until no more dirt appears on the pen or cloth.
g Move the cleaning pen to one of the rollers at location 6. Repeat steps c through f.
h Move the cleaning pen to the other roller at location 6. Repeat steps c through f.
6 Replace the print ribbon cartridge and cleaning roller. Close the printer cover.
7 Replace cards in the input hopper.
8 Print a card to verify the quality of printing. You can print a printer test card, a sample card, or a card
using your card creation application.