User Manual

Safety and compliance Page 1 of 3
12/19/2002
Safety and compliance (FCC)
This section presents:
z
Regulatory compliance information
z
Safety information
z
Trademark acknowledgments
Regulatory compliance
Notice for USA (FCC notice)
This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with this instruction manual, it may
interfere with radio communications. This equipment has been tested and found to be within the limits for Class A computing devices, pursuant to Subpart
J of Part 15 of FCC rules, designed to provide reasonable protection against radio interference in a commercial environment. Operation of this equipment
in a residential environment may possibly cause interference. In the event of interference, the user, at their own expense, will be required to take whatever
measures are necessary to correct the problem.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Notice for Canada
This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites
dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.
The term "IC:" before the radio certification number only signifies that Industry Canada Technical specifications were met.
Notice for Europe
We hereby certify that the Datacard® SP35 printer complies with EMC Directive 89/336/EEC and R&TTE Directive 1999/5/EC.This printer conforms to
Class A of EN 55022 and to EN 301 489-5. Operation of this equipment in a residential environment may possibly cause interference. In the event of
interference, the user, at their own expense, will be required to take whatever measures are necessary to correct the problem.
Notice for Taiwan
Notice for Japan
This equipment is in the Class A category of information technology equipment based on the rules of the Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). When used in a residential area, radio interference may be caused. In this case, the user may be required to
take appropriate corrective actions.