User Manual

Table Of Contents
11
SP35 Info Central
18 Click OK to begin to extract the installation program.
19 Make sure the drive and folder for extracting files is acceptable. Click Unzip to extract files.
20 Click OK at the end of extraction. The installation program starts automatically.
21 Click Next to copy the e-Guide files.
22 Click Finish to close the installation program.
23 Click Exit on the Datacard Group installation program to close it.
If you will connect additional Datacard printers, you can install e-Guides for the Magna Class printer
with AIT, the Select Class printer with AIT, and the ImageCard IV printer. The procedure is slightly
different for these e-Guides. See the User Guide for the printer for details.
Install the printer driver to a USB port on Windows Me or 98
1 Close all applications. Do not close Windows.
2 Make sure printer is powered on.
3 Connect the printer to the PC using the USB data cable. The operating system detects the printer and
displays the Add New Hardware Wizard.
4 With Windows running, insert the CD-ROM in the PC's drive.
The Windows “Add New Hardware” wizard should read the CD-ROM and suppress the Datacard Group
installation program. Use the Add New Hardware wizard to run the driver installation process. Do not
use the Datacard Group installation program if it starts automatically.
If you are using diskettes, extract the files to the PC’s hard drive.
5 On Windows Me, the Wizard might open the SmartDriver installation program and display the License
Agreement. If it does, go to step 9.
On Windows 98, click Next on the Wizard and make sure that “Search for the best driver for my device
(recommended).” is selected.
6 Click Next. Choose the location for the driver to search.
If you are installing from a CD-ROM, click CD-ROM Drive.
If you are installing from the hard disk, choose “Specify a location,” browse to the drive and folder in
which the driver is located, and click OK.
7 Click Next and click Next again.
8 The wizard loads the installation program.
For some Windows Me and 98 PCs, Windows finds USBPrint.inf and installs USB printer support. If
this occurs, the Add New Hardware Wizard appears again. Repeat these steps, beginning with step
5.
9 Click Yes to accept the software license.
10 The installation program displays a question asking whether you would like to view the Release Notes.
Do one of the following:
Click Next to continue.
Click Yes and then Next to open the Release Notes in WordPad. Close the Release Notes when you
have viewed the information.
11 Choose the information to install: