User Manual

Table Of Contents
10
SP35 Info Central
On Windows XP, the wizard might perform several steps automatically. It will require your action at
step 10.
On Windows 2000, the Datacard Group installation program opens. Click on the Found New
Hardware Wizard to use the Wizard.
If you are using diskettes, extract the files to the PC’s hard drive.
5 On the Found New Hardware wizard, click Next.
6 On the Install Hardware Device Drivers page of the wizard, make sure that “Search for a suitable driver
for my device (recommended).” is chosen and then click Next.
7 On the Locate Driver Files page, choose one of the following:
“CD-ROM drives” if you are installing the printer driver from CD.
“Specify a location” if you are installing the printer driver from the PC’s hard drive.
8 Click Next to continue with installation.
If you specified a location, a dialog box in which you can browse appears. Browse to find the DsPnp.inf
file. Click Open and OK.
9 The wizard searches for the file to start installation. When it has found the DsPnp.inf file, click Next to
continue.
10 A Windows message appears.
On Windows 2000, the Digital Signature Not Found message appears. Click Yes to continue with
installation. Security on the PC might be set to prevent installation without a digital signature. See
Windows help for “digital signature” to change the security setting.
On Windows XP, the Windows Logo Signing message appears. Click Yes to continue with
installation. Security on the PC might be set to prevent installation without a digital signature. See
Windows help for “Logo signing” to change the security setting.
If installation is cancelled or cannot continue, see the Running the Cleanup utility for steps to follow.
11 The installation program copies files to the PC and updates entries to enable the printer.
12 A message appears telling you that installation is complete. It also reminds you of important tasks to
perform. Click OK to restart the PC.
13 The Found New Hardware Wizard and Datacard Group installation program close and the PC restarts.
14 After the PC restarts, the Printer Toolbox is displayed. Click the Print Sample Card button to verify
printer and driver installation.
15 If you are installing from CD-ROM, start the driver installation program to install information.
Remove the CD-ROM from the PC drive, and then insert it again. The Datacard Group installation
program appears.
If the Datacard Group installation program does not start, locate the Demo32.exe file in the base
directory of the CD-ROM.
If you are installing using files downloaded from the internet, you can locate the download file for
SP35 Info Central and the e-Guide in the downloads area of the Datacard Web site at
www.datacard.com. Go to Printing sample cards to complete installation.
16 To install information, click User Information on the Datacard Group installation program.
17 Click SP35 Info Central and e-Guide.