Operation Manual

70
IP2162EN - 2014-04-17
Display Description
PO - Adjustment of approach speed during opening.
[cm/s]
Indicates the speed from the end of the deceleration
ramp to the end of the stroke.
02 - Minimum
10 - Maximum
N.B.: gradually increase the approach speed if there is
a series of quick vibrations (chattering) in heavy gates
installed with a slight incline.
03
PC - Adjustment of approach speed during closing.
[cm/s]
Indicates the speed from the end of the deceleration
ramp to the end of the stroke.
02 - Minimum
10 - Maximum
N.B.: gradually increase the approach speed if there is
a series of quick vibrations (chattering) in heavy gates
installed with a slight incline.
03
OO - Obstacle detection limit during opening [cm]
Indicates the distance from the end of the opening
stroke after which each obstacle is considered a stop.
05 - Minimum
99 - Maximum
N.B.: This parameter is only active if → →
40
OC - Obstacle detection limit during closing [cm]
Indicates the distance from the end of the closing
stroke after which each obstacle is considered a stop.
05 - Minimum
99 - Maximum
N.B.: This parameter is only active if → →
40
i
N.B.: make adjustments gradually and only after performing at least three complete
operations to allow the control panel to be set correctly and detect any friction during
operations.