User guide

14
Startup and Shutdown
To Start the enTourage eDGe
Press the power switch. The enTourage eDGe will start up. Startup will take a few moments.
Two LEDs will indicate that the power is on: the Power LED in the middle of the power switch, and the LED in the
middle of the trackball. The screen will ash and the enTourage eDGe logo will appear. The e-book reader screen
will display either the startup message or the last book you were reading. You will know that the enTourage eDGe is
ready to use when you see the home touchscreen.
To Shut Down the enTourage eDGe
Press and hold the power switch to turn off the enTourage eDGe.
To conserve battery power, set a touchscreen timeout.
Return to Contents