User`s guide

Hydra HD – B Series User’s Guide



FRONT PANEL AND REAR PANEL

Figure 2-1 Hydra HD Front Panel

Part Name Description

1. Standby Switch Power up or put Hydra HD in standby mode

2. Smart Card Slot For future use

3. Standby / On Indicator Orange in standby mode and starting

Green when started

4. IR receiver Remote control IR receiver

5. Arrow Keys UP arrow for setting HDMI and Component resolution

Other usage according to middleware

6. Front Panel Display Start-up messages

Clock after starting

7. OK Button Trigger remote registration mode

Other usage according to middleware

8. Reset Pin Hole Restart Hydra HD

Figure 2-2 Hydra Rear Panel

Part Name Description

1. SATA eSATA port for connecting to external SATA hard drive for DVR and PLTV

2. DIGITAL AUDIO S/PDIF digital coaxial RCA audio output for decoder 1

3. S-VIDEO S-Video output for decoder 1

4. OPTICAL AUDIO S/PDIF digital optical audio TOSLINK output for decoder 1

5. HDMI HDMI output for decoder 1

6. AUDIO LEFT / RIGHT Composite audio output for decoder 1

7. VIDEO Composite video output for decoder 1

8. Y Pb Pr Component video output for decoder 1

9. TV OUT RF Type-F connector for decoder 1 (factory set to channel 10)

10. ATSC IN Optional RF Type-F connector for ATSC coaxial input

11. MATV OUT RF Type-F connector for decoder 1, 2 and 3 (factory set to channel 10, 23 and 39)

12. Caller ID RJ11 plug for connecting to telephone line for caller ID display

13. USB x 2 2 x USB port for future use

14. ETHERNET RJ45 plug for connecting to ADSL modem or network access equipment

15. REMOTE ANTENNA RF Type-F connector for connecting the RF remote control antenna

16. DC INPUT DC power jack