User guide

Set Top Box

1. REMOTE CONTROL Connects the set top box to a wall jack using

coax cable to provide video service.

2. SATA Connects the set top box to an external DVR storage device.

3. CH3 / CH4 Determines the channel the set top box uses to output

video service to the TV over the RF TV connection - adjust if a local

over-the-air channel is interfering with reception.

4. COAX Connects the set top box to your TV using a standard coax

cable - provides audio and video.

5. VIDEO Connects the set top box to provide good quality video -

provides video only.

6. AUDIO LEFT/RIGHT Connects the set top box to provide stereo audio

- provides audio only.

7. VIDEO PB/PR/Y Connects the set top box to your TV to provide very

high-quality video - provides video only.

8. OPTICAL AUDIO (S/PDIF) Connects the set top box to a home theater

system via ﬁber optic cable for best quality audio - provides audio only.

9. S-Video Connects the set top box to your TV to provide high-quality

video - provides video only.

10. HDMI Connects the set top box to your HDTV using an HDMI cable

- provides best quality audio and video.

11. ETHERNET Connects the set top box to the video service using a

CAT5 Ethernet cable.

12. USB 2.0 (Universal Serial Bus) Connects the set top box to technician’s

equipment and other USB devices. This is also used to connect a

keyboard for advanced applications, widgets, etc.

13. DC INPUT Provides power to the set top box.

Entone Amulet 351

1 2 3 4 5 6 7 8 9 10 11 12 13

DVR Sidecar Unit