User's Manual Part 4

T ECHNICAL D OCUMENTATION P ROTECTING P EOPLE AND A SSETS
®
D
ATE
:
27
M
ARCH
2017
|
V
ERSION
:
1.8
93
R
ANGER
®
-
X5
R
ADAR
S
YSTEM
(M
OBILE
)
F
UNCTIONAL
O
VERVIEW AND
T
HEORY OF
O
PERATION
EEC
®
|
C
OMPANY
P
ROPRIETARY
OpenSuSE desktop (see Figure 77). Click the icon to open the EDGE program.
.
Figure 77. EDGE Application Icon
g. The EDGE “Control Menu” will display once the program starts.
Figure 78. EDGE Control Menu
Refer to the EDGE Operations Manual for Operational Instructions using the EDGE software.
5.1.1.1. Verification of Alignment to True North
1. After all components are powered “ON,” the pedestal should have successfully “homed”
and “aligned” facing the forward position (based on Paragraph 5.1.1, Step 5.) It will
continue, automatically, to adjust itself to “True North” as described in this Verification.
2. After aligning with the front of the unit, the antenna will remain in that position until the
EDGE software receives the GPS / Compass information from the GPS / Compass