User's Manual Part 4

T ECHNICAL D OCUMENTATION P ROTECTING P EOPLE AND A SSETS
®
D
ATE
:
27
M
ARCH
2017
|
V
ERSION
:
1.8
92
R
ANGER
®
-
X5
R
ADAR
S
YSTEM
(M
OBILE
)
F
UNCTIONAL
O
VERVIEW AND
T
HEORY OF
O
PERATION
EEC
®
|
C
OMPANY
P
ROPRIETARY
Normally, it is:
i. User ID: root
ii. Password: eecj#### (where #### us the job number for the production unit –
ex. eecj9818 or eecj9821
e. After completing the EDGE login, the OpenSuSE desktop will display. From the
selection of desktop icons, run the “c2inter.sh” icon as shown in Figure 75.
Figure 75. EDGE A to EDGE B Script ICON
This icon runs a script that establishes communication between the radar’s EDGE “A” computer and an
online VPS server used to communicate with the EDGE “B” remote computer located at the TV studio.
After selecting the icon the script will begin to run and appear similar to Figure 76.
Figure 76. EDGE Communications Window
The EDGE Communications Window may be minimized but it MUST remain running in the background to
maintain communication between the Local Radar System workstation and the REMOTE EDGE
workstation (normally studio or weather station). Use the down arrow at the upper right-hand corner of the
display to minimize, but not close this window.
f. After minimizing the window in Step e., select the EDGE icon located on the