User's Manual Part 2

T ECHNICAL D OCUMENTATION P ROTECTING P EOPLE AND A SSETS
®
D ATE : 22 M ARCH 2017 | V ERSION : 1.4
44
R ANGER -X5 R ADAR S YSTEM
T
ROUBLESHOOTING
,
M
AINTENANCE
,
AND
C
ALIBRATION
EEC
®
|
C
OMPANY
P
ROPRIETARY
2. Step 2:
Disconnect all power and cables from the Ethernet Controllers.
3. Step 3:
Loosen and remove the four (4) Philips head screws holding Controller to the mounting
plate (See Figure 14).
Figure 14. Temperature Controller Retaining Screws
4. Step 4:
Remove the Controller from the Plenum Assembly.
5. Step 5:
Reinstall in reverse order of Steps 1-4.
Calibration:
None
2.1.3.2. Transceiver Assembly (Horizontal) (Unit 2 A1 A3 A2)
Troubleshooting:
SD-135895-100 or SD-136033-100