User's Manual Part 2

T ECHNICAL D OCUMENTATION P ROTECTING P EOPLE AND A SSETS
®
D ATE : 22 M ARCH 2017 | V ERSION : 1.4
43
R ANGER -X5 R ADAR S YSTEM
T
ROUBLESHOOTING
,
M
AINTENANCE
,
AND
C
ALIBRATION
EEC
®
|
C
OMPANY
P
ROPRIETARY
Figure 13. Ethernet Switch Retaining Brackets
4. Step 4:
Remove the Ethernet Switch from the Plenum Assembly.
5. Step 5:
Reinstall in reverse order of Steps 1-4.
Calibration:
None
2.1.3.1.5. Peltier Device Temperature Controller (Unit 2 A1 A3 A1 A6, A7)
Troubleshooting:
SD-135953-100 or -101 Sheet 1 of 4
Troubleshoot the Peltier Device Temperature Controller Use Vendor Documentation (See
Volume 2, Section 4, Paragraph 2.1.3.1.5)
Maintenance:
1. Step 1:
Remove the cover from the Plenum Assembly by releasing the four quick-disconnect
latches and by loosening two Retaining Screws (see Figure 11), then remove the lid.