User's Manual Part 2

T ECHNICAL D OCUMENTATION P ROTECTING P EOPLE AND A SSETS
®
D ATE : 22 M ARCH 2017 | V ERSION : 1.4
68
R ANGER -X5 R ADAR S YSTEM
T
ROUBLESHOOTING
,
M
AINTENANCE
,
AND
C
ALIBRATION
EEC
®
|
C
OMPANY
P
ROPRIETARY
5. Verify all connections between Aquarian controller PCA, and Elmo servo amplifier are
connected properly.
4.3. Communication
4.3.1. Network Communication
1. Verify that the cabinet is connected to your network via Ethernet cable.
2. Verify that you are receiving adequate service from your network or internet service
provider.
3. Verify that the Ethernet hubs are receiving the proper voltage, and are powered on.
4. Verify that all Ethernet connections inside the cabinet are securely connected to their
respective ports.
5. If you are still experiencing internet communication issues, please contact EEC’s
customer service department, your ISP, or network service administrator as applicable.
4.3.2. Control Cabinet to/from Pedestal
1. Verify that the pedestal is powered on.
2. Verify that all Ethernet and fiber optic connectors are properly connected (to include the
cabinet, enclosure box, and pedestal).
3. Verify that all of the Ethernet hubs are receiving the proper voltage (+12 VDC), and are
powered on (to include the cabinet, enclosure box, and pedestal).
4. Verify that the Ethernet signal is passing through the slip ring by “pinging” the UST.
5. If you are still experiencing communication issues, please contact EEC’s customer
service department.