User's Manual Part 2

T ECHNICAL D OCUMENTATION P ROTECTING P EOPLE AND A SSETS
®
D ATE : 22 M ARCH 2017 | V ERSION : 1.4
59
R ANGER -X5 R ADAR S YSTEM
T
ROUBLESHOOTING
,
M
AINTENANCE
,
AND
C
ALIBRATION
EEC
®
|
C
OMPANY
P
ROPRIETARY
Remove the Aquarian Servo Controller from the Elevation Assembly.
4. Step 5:
Reinstall in reverse order of Steps 1-4.
Calibration:
None
2.1.5.5. Regeneration Clamp (Unit 2 A1 A5 A5)
Troubleshooting:
SD-135886-100 Sheet 1 of 3
EEC-135886-100 Sheet 2 of 5
Sheet 3 of 5
1. Step 1:
The Regeneration Clamp will prevent power from reaching the Servo Controller and the
Servo Amplifier. Check the input Voltage (V IN + and V IN -) to ensure input power is
available. If not, troubleshoot power from the control cabinet.
Maintenance:
1. Step 1:
Open the Pedestal Plate Enclosure Assembly using the latches and swing the lid out of
the way.
Figure 17. Regeneration Clamp
1. Step 2:
Remove the four (4) screws connecting the Regeneration Clamp to the Pedestal Plate
Enclosure Assembly floor.