User's Manual

Locks and Security
Unlocking the doors with the keyless entry system
To unlock the driver door, enter
either the factory set code or the
personal code (each digit must be
pressed within five seconds of the
prior digit).
1 - 2 3 - 4 5 - 6 7 - 8 9 - 0
To unlock all doors, enter the factory set code or personal code
(driver door unlocks) and press the 3/4 control within five seconds.
Locking the doors with the keyless entry system
It is not necessary to enter the
factory or personal code prior to
locking all doors. To lock the doors:
1 - 2 3 - 4 5 - 6 7 - 8 9 - 0
• Press the 7/8 control and the 9/0 control at the same time.
Replacing the batteries
One coin type three-volt lithium battery BR2335 (Ford Part #
XXXX-XXXXX-AA) powers the keyless entry keypad. This
battery must be purchased through a Ford or Lincoln/Mercury
dealer parts and service department.
Low Battery Warning:
When the batteries of the Keyless Entry Keypad are running low
and need to be changed, the vehicle will give you a warning. After
entering your factory set or personal entry code in the keypad,
instead of unlocking the driver’s door, the vehicle will unlock the
driver’s door, lock it, and then unlock it again.