User's Manual

Locks and Security
vehicle. If a second personal code is entered, the module will erase
it in favor of the new code.
If you wish to erase your personal code, use the following
instructions:
1. Enter factory set code.
2. Press 1/2 control within five seconds of step one.
3. Press 7/8 control and 9/0 control
at the same time within five seconds
of step 2.
1 - 2 3 - 4 5 - 6 7 - 8 9 - 0
The system will now only respond to the factory set code.
Anti-Scan Feature
1 - 2 3 - 4
The keyless entry pad is disabled for
1 minute after 7 unsuccessful
attempts at entering a valid key
code. The keypad will flash during
this 1 minute mode. However, the 7/8 and 9/0 cont
5 - 6 7 - 8 9 - 0
rols will still
one minute of keypad inactivity
lock the vehicle.
Anti-scan will turn off after:
•