User's Manual

ManualsBrandsEnterprise Electronics ManualsElectronicsMulti-Mode Radar System

CHAPTER 8 INTERFACE CONTROL DOCUMENTS (ICD)

APPENDIX A INTERFACE CONTROL DOCUMENTS (ICD)

ISSUE/REVISION DATE: 25 JULY 2007 TECHNICAL MANUAL

ISO 9001:2000 PROPRIETARY

Interface Control Document (ICD) ENTERPRISE ELECTRONICS CORPORATION

Rev No. 5 Page 16 of 21

Issue Date 25 July 2007 UM-130365

Distribution Data Collection

Module (DDC)

THE DATA PRESENTED HEREIN REPRESENTS THE INTELLECTUAL PROPERTY OF ENTERPRISE ELECTRONICS CORPORATION (EEC). THIS DATA MAY NOT BE DISTRIBUTED OR REPRODUCED BY

ANY MEANS WITHOUT THE EXPRESS, WRITTEN CONSENT OF EEC.

Operational Parameter Configuration

At the command prompt you may enter the setup menu by typing the command setup. The displayed

setup menu should look similar to what is displayed below.

SETUP MENU

The menu is operated by simply entering the number or letter preceding the desired menu option. Once

all desired changes are made simply entering an S will save the options to flash and reboot the processor.

Network Configuration

1) IP ADDRESS

When prompted enter the IP address in the standard IPv4 dotted decimal notation ex: 10.60.5.10.

2) IP MASK

When prompted enter the netmask in the standard IPv4 dotted decimal notation ex: 255.255.255.0