Specifications

IGMP Clear and Show Commands
XSR CLI Reference Guide 7-95
Default
Thethresholdis0
Example
Thefollowingexamplesetsthesourcetreeswitchingthresholdto4kbps:
XSR(config)#ip pim spt-threshold 4
IGMP Clear and Show Commands
clear ip mroute
Thiscommanddeletesentriesfromthemulticasttable.
Syntax
clear ip mroute [group-address][source-address]
Mode
EXECconfiguration:XSR>
show ip igmp groups
ThiscommanddisplaysthemulticastgroupswithreceiversthataredirectlyconnectedtotheXSR
andwerelearnedthroughtheInternetGroupManagementProtocol(IGMP).
Syntax
show ip igmp groups [group-address | type number | summary]
Mode
EXECconfiguration:XSR>
Example
Thefollowingexampledisplayssampleresponses:
XSR>show ip igmp groups
Interface name: FastEthernet1
group-address
IPaddressofthemulticastgroup.
source-address
IPaddressofthemulticastsource.
group-address
Addressofthemulticastgroup.
type
Interfacetype.
number
Interfacenumber.
summary
Aone‐line,abbreviatedsummaryofeachentryintheIGMPgroupstable.