Specifications

Cable, CompactFlash and Accessory Specifications
A-64
Cable, CompactFlash and Accessory Specifications
Refer to the following table for specifications of cables, CompactFlash and accessories for the XSR.
This equipment can all be obtained separately from Enterasys Networks or through any computer
supply retailer.
Environment Operating
Temperature
5 - 40° C
Storage
Temperature
-20 - 85° C
Relative Humidity 5% - 95%, non-condensing
External
Power Supply
AC Input Voltage
& Frequency
90 - 265 VAC (47-63 Hz)
+5V output1 5A continuous, 8A maximum
+12V output2 1.5A continuous, 2A maximum
-12V output3 0.5A continuous, .9A maximum
I/O Interfaces Onboard (LAN) 2 10/100BaseT Ethernet ports with RJ-45 connectors
RS-232 Console serial port with DB-9 connector
NIM (WAN) Slots Dual or Quad synch/asynch Serial ports with DB-type connector also
supporting X.21, V.35, EIA-449, EIA-232/530, and combined V.35/
EIA-232/530 DTE interfaces with required adapter.
Single, dual, or quad port T1/E1 NIM with integral CSU/DSU and
RJ-48C connectors. Full-channel, fractional or unchannelized.
Single port T3/E3 un-channelized NIM with BNC connectors
I/O Interfaces NIM (WAN) Slots Dual or quad port BRI/PRI S/T NIM (RJ-45) or U NIM with RJ-45 or
RJ-49C connectors, respectively.
Single port Annex A/C or B ADSL NIM with RJ-11 connector. Includes
CompactFlash card.
Dual port T1/E1 Drop and Insert NIM with RJ-45 connectors.
NIM (LAN or
WAN)
Single port 10/100Base-T Copper or 10/100Base-F Fiber-optic
Ethernet NIM with RJ-45 connector or MT-RJ multi-mode interface,
respectively.
Chassis LEDs 10 Display port and system status, warn of Flash upgrade.
Table A-1 XSR Hardware Specifications (continued)
Category Parameters
Table A-2 XSR Cabling/Accessory Guide
Part Description Connector Part # Function
6’ DB-9 null modem cable DB-9, male N/A from
Enterasys
Console link to serial line