Specifications

Bootrom Monitor Mode Commands

XSR Getting Started Guide 3-59

• Display or change date and time on real-time clock

• Commands for development use only

This command initiates a cold reboot.

This command initiates a warm reboot.

This command changes the Bootrom password. The default password is blank. You are prompted

to enter a password by the following script:

XSR-1800:bp

Enter current password:

Enter new password: ******

Re-enter new password: ******

Password has changed.

If the Bootrom password is lost you can restore it by pressing the Default button. Be aware that

when pressed, the Default button erases all configuration files and the master encryption key.

This command updates the bootrom file from a local file. You are prompted to enter data by the

following script. When the “

Proceed with erasing Bootrom in flash ...” statement appears,

enter y. Be sure not to interrupt the process or power down the XSR or it may be affected

adversely. After you have updated this file, you can delete it from Flash to conserve space for

other files.

XSR-1800: bu cflash:bootrom1_20.fls

Checking cflash:bootrom1_20.fls...

Updating bootrom with file, "cflash:bootrom1_20.fls".

Proceed with erasing current Bootrom in flash and replace with

cflash:bootrom2_02.fls? y

*****************************************************

* Do not interrupt or power down until complete! *

*****************************************************

Erasing 8 sectors at address=0xfff00000

Programming 130816(0x1ff00) bytes at address 0xfff00100

Programming 131072(0x20000) bytes at address 0xfff20000

Programming 131072(0x20000) bytes at address 0xfff40000

Programming 131072(0x20000) bytes at address 0xfff60000

Programming 131072(0x20000) bytes at address 0xfff80000

Programming 131072(0x20000) bytes at address 0xfffa0000

Programming 31320(0x7a58) bytes at address 0xfffc0000

Programming high branch instruction at address 0xfffffffc

Verifying Bootrom flash sectors