Specifications

Installing the NIM Cards
2-14 Hardware Installation
6. Reorient the NIM brace and fasten it to the NIM as shown in Figure 2-4.
Figure 2-4 Installing NIM Brace
7. Press the NIM gently into the pin holding assembly in the open card slot (NIM 2) and fasten to
the chassis with the screws provided as shown in Figure 2-5.
Figure 2-5 Installing NIM Card
8. Replace the rear panel screws to support and ground the NIM.
9. Screw the rear access cover to the chassis.
10. Screw the end cap to the chassis.
SN
ADD
NET.
POWER
SWITCHCORD
DEFAULT
ETH1 ETH2 COM
NIM 1 NIM 2