Specifications

Installing the NIM Cards
XSR Getting Started Guide 2-13
4. Unfasten the four screws holding the rear access cover to the chassis and remove it as shown
in Figure 2-2.
Figure 2-2 Removing Rear Access Cover
5. Unfasten the two screws securing the NIM brace/grounding plates and remove them as
shown in Figure 2-3.
Figure 2-3 Removing Brace/Grounding Plates
SN
ADD
NET.
POWER
SWITCHCORD
DEFAULT
ETH1 ETH2 COM
NIM 1 NIM 2
POWER
SWITCH
CORD
RESET
ELAN 1
ELAN 2
COM
SLOT 1
SLOT 2