Specifications

9033640 VH-8G User Interface 49
802.1Q VLAN Static Table Configuration
Use this screen to create a new VLAN or modify the settings for an
existing VLAN. You can add/delete port members for a VLAN, or prevent
a port from being automatically added to a VLAN via the GVRP protocol.
(Also, note that all ports can only belong to one untagged VLAN. This is
set to VLAN 1 by default, but can be changed via the Port Assignment
VLAN Configuration screen on page 51.)
Figure 2-38. 802.1Q VLAN Static Table Configuration
Vertical Horizon Local Management -- VH-8G
1Q VLAN Static Table Configuration
VID VLAN Name Status
--------------------------------------
1 Active
Egress Ports Forbidden Egress Ports
11111111 00000000
Untagged Ports
11111111 VID : 1
[Show]
[More]
[New]
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
<Enter> to select.
Parameter Description
VID The ID for the VLAN currently displayed.
Range: 1-2048
VLAN Name A user-specified symbolic name for this VLAN.
String length: Up to 8 alphanumeric characters
Status Sets the current editing status for this VLAN as:
Not in Service, Destroy, or Active.
Egress Ports Set the entry for any port in this field to “1” to add it to the
displayed VLAN, or “0” to remove it from the VLAN.
Forbidden Egress
Ports
Prevents a port from being automatically added to this VLAN via
GVRP.
Untagged Ports Set the entry for any port in this field to “1” to add it to the
displayed VLAN as an untagged port.
[Show] Displays settings for the specified VLAN.
[More] Displays consecutively numbered VLANs.
[New] Sets up the screen for configuring a new VLAN.