Specifications

42 VH-8G User Interface VH-8G

Configuring Bridge MIB Extensions

The Bridge MIB includes extensions for managed devices that support

Traffic Classes, Multicast Filtering and Virtual LANs. To configure these

extensions, use the Extended Bridge Configuration screen as shown

below:

Figure 2-32. Extended Bridge Configuration

Vertical Horizon Local Management -- VH-8G

Extended Bridge Configuration

Bridge Capability : (Read Only)

Extended Multicast Filtering Services: NO

Traffic Classes : YES

Static Entry Individual Port : YES

Configurable PVID Tagging : YES

Local VLAN Capable : NO

Bridge Settings :

Traffic Class : TRUE

VLAN Learning : SVL

GMRP : DISABLED

GVRP : DISABLED

Use <TAB> or arrow keys to move. <Space> to scroll options.

Parameter Description

Bridge Capability

Extended Multicast

Filtering Services

Indicates that the switch does not support the filtering of individual

multicast addresses based on GMRP (GARP Multicast

Registration Protocol). Note that this function is not implemented

for the current firmware release.

Traffic Classes Indicates that the switch provides mapping of user priorities to

multiple traffic classes. (Refer to 802.1P Configuration.)

Static Entry

Individual Port

Indicates that the switch allows the static filtering for unicast and

multicast addresses. (Refer to Network Monitor Menu / Static

Unicast Address Table Configuration and Static Multicast

Address Table Configuration.)

Configurable

PVID Tagging

Indicates that the switch allows you to override the default PVID

setting (Port VLAN ID used in frame tags) and its egress status

(VLAN-Tagged or Untagged) on each port. (Refer to Port

Assignment VLAN Configuration.)

Local VLAN

Capable

This switch does not support multiple local bridges (that is,

multiple Spanning Trees).