Specifications

38 VH-8G User Interface VH-8G
You can use the Port Trunking Configuration screen set up port trunks as
shown below:
Figure 2-29. Port Trunking Configuration
Vertical Horizon Local Management -- VH-8G
Port Trunking Configuration
Trunk ID Status Member List
1 2 3 4
------------- ------------- ---------------- ---------------- ---------------- ----------------
Port : -- Port : -- Port : -- Port : --
Port : -- Port : -- Port : -- Port : --
Port : -- Port : -- Port : -- Port : --
Trunk ID : 1 Trunk ID : 1 Member Port : 1
[Show] [More]
[Enable] [Disable] [Add] [Delete]
<OK>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Trunk ID Configure up to four trunks per switch (ID of 1~4).
Port Select from 2~4 ports per trunk.
[Show] Displays trunk settings, where the first trunk listed is specified by
“Sorted by Trunk ID.”
[More] Scrolls through the list of configured trunks.
[Enable] [Disable] Enables/disables the selected trunk.