Specifications

90 VH-2402-L3 Management Guide 9033691-01
Status:<Disabled>
bar between Disabled and Enabled.
This determines if the static DNS table
will be used or not.
To make a static DNS table entry:
Highlight Static Table Setting on the DNS Relay menu and
press Enter.
Figure 1-71. DNS Relay Setup
Parameter Description
Action:<Add/Edit>
The Action:<Add/Edit> field can be
toggled between Add/Edit and Delete.
Enter the Domain name and its
corresponding IP address.
Domain Name
The domain name of the static DNS table
entry.
IP Address
The IP address of the domain name
above.
Status:<Enabled>
This field can be toggled using the space
bar between Enabled and Disabled.