Specifications

9033691-01 VH-2402-L3 Management Guide 65
Figure 1-47. Target Port Selection
The target port is the port where information will be
duplicated and sent for capture and network analysis. This
is the port where a network analyzer would be attached to
capture packets duplicated from the source port.
To select the source port(s) for mirroring, highlight Port
Mirroring Settings and press enter.
Figure 1-48. Port Mirroring Settings
Up to 25 entries can be made to the port mirroring table, but
it should be noted that a faster port (a 1000 Mbps Gigabit
Ethernet port, for example) should not be mirrored to a
slower port (one of the 24 100 Mbps Fast Ethernet port),
because many packets will be dropped.
Parameter Description
Action:<Add/Modify> This field can be toggled between
Add/Modify and Delete using the space
bar. Entries can be added, modified or
deleted based upon the port number
entered in the Source Port [ ] field.