Specifications

9033691-01 VH-2402-L3 Management Guide 61
interface. The DVMRP route cost is a
relative number that represents the real
cost of using this route in the
construction of a multicast delivery tree.
It is similar to, but not defined as, the hop
count in RIP. The default cost is 1.
State:<Disabled>
This field can be toggled between
Enabled and Disabled and enables or
disables DVMRP for the IP interface.
The default is Disabled.
IP Address:
Displays the IP address corresponding to
the IP Interface name entered above.
Probe Interval:[10 ]
The Probe Interval:[10 ] field allows an
entry between 0 and 65,535 seconds and
defines the interval between ‘probes’.
DVMRP defines an extension to IGMP
that allows routers to query other routers
to determine if a multicast group is
present on an given IP interface or not.
The default is 10.
Include Unknown
Neighbor
Report:<Disabled>
Allows the L3 switch to accept a DVMRP
route report from a non-adjacent
neighbor.
PIM-DM
<<Please refer to the product Release Notes before enabling
this feature>>
To configure PIMDM for an IP interface:
Highlight PIMDM Interface Configuration from the Setup
IP Multicast menu and press enter.