Specifications

9033691-01 VH-2402-L3 Management Guide 51
Delete allows for the deletion of a
previously made entry.
VID:[ ]
Allows the specification of the VLAN ID
(VID) of the VLAN the static multicast
group member belongs to.
Multicast MAC
Address:[ ]
Allows the entry of the MAC address of a
static multicast group member.
(E/F/-): [ ][ ][ ]
To set a port’s multicast group
membership status, highlight the first
field of. Each port’s multicast group
membership can be set individually by
highlighting the port’s entry using the
arrow keys, and then toggling between E,
F, or – using the space bar.
E
Egress Member - specifies the port as
being a static member of the multicast
group. Egress Member Ports are ports
that will be transmitting traffic for the
multicast group.
F
Forbidden Non-Member - specifies the
port as not being a member of the
multicast group and that the port is
forbidden from becoming a member of
the multicast group dynamically.
-
Non-Member - specifies the port as not
being a member of the multicast group,
but the port can become a member of the
multicast group dynamically.
Static Router Port Settings
A static router port is a port that has a multicast router
attached to it. Generally, this router would have a
connection to a WAN or to the Internet. Establishing a router
port will allow multicast packets coming from the router to be
propagated through the network, as well as allowing