Specifications

9033691-01 VH-2402-L3 Management Guide 49
Parameter Description
Switch IGMP
Snooping:<Disabled>
This field can be toggled using the space
bar between Disabled and Enabled.
This is used to Enable or Disable IGMP
Snooping, globally, on the switch.
Querier State:<Non-
Querier>
This field can be toggled between Non-
Querier, V1-Querier, and V2-Querier.
This is used to specify the IGMP version
(1 or 2) that will be used by the IGMP
interface when making queries.
Robustness
Variable:[ 2]
A tuning variable to allow for sub-
networks that are expected to lose a
large number of packets. A value
between 2 and 255 can be entered, with
larger values being specified for sub-
networks that are expected to lose larger
numbers of packets.
Query Interval:[125 ]
Allows the entry of a value between 1
and 65500 seconds, with a default of 125
seconds. This specifies the length of
time between sending IGMP queries.
Max. Response:[10]
Sets the maximum amount of time
allowed before sending an IGMP
response report. A value between 1 and
25 seconds can be entered, with a
default of 10 seconds.
IEEE 802.1Q Multicast Forwarding
To edit the IEEE802.1 Multicast Forwarding settings,
highlight IEEE802.1Q Multicast Forwarding Settings from
the Multicasting Menu and press enter.