Specifications

48 VH-2402-L3 Management Guide 9033691-01
IGMP Snooping Settings
To configure IGMP Snooping, highlight IGMP Snooping
Settings from the Multicasting Menu and press Enter.
Figure 1-36. IGMP Snooping
IGMP Snooping can be globally enabled or disabled from the
IGMP Snooping Settings menu.
To configure IGMP Snooping:
Toggle the Switch IGMP Snooping:<Disabled> field to
Enabled. Toggle the Querier State:<Non-Querier> field to
the appropriate choice between Non-Querier, V1-Querier,
and V2-Querier to determine the version of IGMP that is
used in your network. A value between 2 and 255 can be
entered for the Robustness Variable (default is 2). The
Query Interval:[125 ] can be set between 1 and 65500
seconds (default is 125 seconds). This sets the time
between IGMP queries. The Max Response:[10] allows a
setting between 1 and 25 seconds (default is 10) and
specifies the maximum amount of time allowed before
sending a response report.
Highlight APPLY and press Enter to make the settings
effective.