Specifications

34 VH-2402-L3 Management Guide 9033691-01
switch’s reaction to a Broadcast/Multicast
storm.
Broadcast Storm
Mode:<Disabled>
This field can be toggled between
Enabled and Disabled using the space
bar. This enables or disables, globally, the
switch’s reaction to Broadcast storms,
triggered at the threshold set above.
Multicast Storm
Mode:<Disabled>
This field can be toggled between
Enabled and Disabled using the space
bar. This enables or disables, globally, the
switch’s reaction to Multicast storms,
triggered at the threshold set above.
Advanced Setup
Changing switch operation mode setting changes some of
the menus and configuration options for the Advanced Setup
of the switch. The configuration data, however, is saved
when the switch’s operating mode is changed.
Configuring VLANs
The switch allows the assignment of an IP
interface to each VLAN, in IP Routing mode. The
VLANs must be configured prior to setting up
the IP interfaces.
VLANs by Switch Operating Mode
To create a new 802.1Q VLAN:
The VLAN menu adds an entry to edit the VLAN definitions
and to configure the port settings for IEEE 802.1Q VLAN