Installation guide

Rack Mounting
SNS-TAG-HPA / SNS-TAG-LPA Installation Guide 2-5
Mid-Mount
Theapplianceshipswithamid‐mountaccessorykit.Figure 2‐2showstheapplianceinstalledina
rack,withthefrontmountattached,andamid‐mountplacementexample.
Toattachtheappliancetotherack,performthefollowingsteps:
1. Usethetwomountingholesclosesttothecenteroftheappliance
formorebalanced mounting
position.
2. UsetheM4screws(2screwsforeachside)tosecurethecentermountingbrackettothe
appliance.Whensecuringtheappliancetotherack,usetheM5screwstosecurethechassisto
thepostoftherack.
Figure 2-2 Rack Mounting—Mid-Mount