Setup guide

5-2 SmartSwitch 6A000 Installation and Setup Guide
Technical Specifications Specifications
.
Note The ‘MON' and ‘DIAG' functions are not used in this release.
5.2 TECHNICAL SPECIFICATIONS
Table 5-1 Front panel LEDs
LED Function
FAIL (red) Normally OFF; ON indicates CPU failed.
STATUS
(amber)
Normally OFF; ON indicates an error condition that prevents alarm information from being
displayed to the console.
POWER
(green)
Normally ON; OFF indicates the CPU is not receiving power from the power supply.
RX DATA
(green)
Normally FLASHING intermittently if there is receive activity on the port; indicates the Ethernet
port is up and receiving Ethernet frames.
TX DATA
(green)
Normally FLASHING intermittently if there is transmit activity on the port; indicates the Ethernet
port is up and transmitting Ethernet frames.
Table 5-2 Hardware Specifications
Specification Value
Processor i960CF, 33 MHz
Switching engine 2.5 Gbps, non-blocking
Max I/O ports 7 for 6A000-02; 15 for 6A000-04
Switch latency 10 microseconds
CPU DRAM memory 32 MB
Buffer memory (cells) 32 K
flash memory 8 MB
Serial port RS-232c compliant; RJ-45 connector
Ethernet port IEEE 802.3 compliant; RJ-45 connector