Datasheet

Page 14
Physical Specifications
• S8-Chassis dimensions (H x W x D): 63.96 cm x 44.70 cm x 47.32 cm
(25.19” x 17.60” x 18.63”), 14.5U
• S8-Chassis-POE4 dimensions (H x W x D): 72.87 cm x 44.70 cm x
47.32 cm (28.69” x 17.60” x 18.63”), 16.5U
• S8-Chassis-POE8 dimensions (H x W x D): 77.31 cm x 44.70 cm x
47.32 cm (30.44” x 17.60” x 18.63”), 17.5U
• S6-Chassis dimensions (H x W x D): 88.7 cm x 44.70 cm x 47.35 cm
(34.92” x 17.59” x 18.64”), 20U
• S6-Chassis-POE4 dimensions (H x W x D): 97.5 cm x 44.70 cm x
47.35 cm (38.39” x 17.59” x 18.64”), 22U
• S4-Chassis dimensions (H x W x D): 40.00 cm x 44.70 cm x 47.32 cm
(15.75” x 17.60” x 18.63”), 9U
• S4-Chassis-POE4 dimensions (H x W x D): 48.90 cm x 44.70 cm x
47.32 cm (19.25” x 17.60” x 18.63”), 11U
• S3-ChassisA dimensions (H x W x D): 31.11 cm x 44.70 cm x 47.32
cm (12.25” x 17.60” x 18.63”), 7U
• S3-Chassis-POEA dimensions (H x W x D): 37.46 cm x 44.70 cm x
47.32 cm (14.75” x 17.60” x 18.63”), 9U
• S1-Chassis dimensions (HxWxD): 8.69cm x 44.88cm x 60.27cm
(3.42” x 17.67” x 23.73”), 2U
• S-Series Stand Alone (SSA) dimensions (SSA130/SSA150) (H x W x
D): 4.44 cm x 44.70 cm x 59.43 cm (1.75” x 17.60” x 23.40”), 1U
• S-Series Stand Alone (SSA) dimensions (SSA180) (H x W x D): 4.37
cm x 44.73 cm x 57.30 cm (1.72” x 17.61” x 22.55”), 1U
Environmental Specifications
• Operating Temperature: +5 °C to +40 °C (41 °F to 104 °F)
• Storage Temperature: -30 °C to +73 °C (-22 °F to 164 °F)
• Operating Humidity: 5% to 95% relative humidity, non-condensing
• Storage Humidity: 5% to 95% relative humidity, non-condensing
• Power Requirements: 100 to 125 VAC or 200 to 250 VAC; 50 to 60 Hz
• Operational Altitude: 10K Feet
Agency and Standards Specifications
• Safety: UL 60950-1, FDA 21 CFR 1040.10 and 1040.11, CAN/CSA
C22.2 No. 60950-1, EN 60950-1, EN 60825-1, EN 60825-2, IEC
60950-1, 2006/95/EC (Low Voltage Directive)
• Electromagnetic compatibility: FCC 47 CFR Part 15 (Class A), ICES-
003 (Class A), EN 55022 (Class A), EN 55024, EN 61000-3-2, EN
61000-3-3, AS/NZ CISPR-22 (Class A). VCCI V-3. CNS 13438 (BSMI),
2004/108/EC (EMC Directive)
Power over Ethernet (PoE) Specifications
• IEEE 802.3af
• IEEE 802.3at
• Total PoE Power: 16,000 Watts @ 240vAC input or 9,600 Watts @
120vAC input (8 Bay PoE power system)
• Total PoE Power: 8,000 Watts @ 240vAC input or 4,800 Watts @ 120vAC
input (4 Bay PoE power system)
• Maximum available PoE power for the SSA switch is 650 watts with two
power supplies installed in redundant mode and 1,650 watts in additive
mode when using 1000 watt power supplies
• Automated or manual PoE power distribution
• Per-port enable/disable, power level, priority safety, overload, and short-
circuit protection
• System power monitor
Specifications
Ordering Information
Part Number Description
S8 Chassis
S8-Chassis
S-Series S8 Chassis and fan trays (Power supplies ordered separately)
S8-Chassis-POE4
S-Series S8 Chassis and fan trays with 4 bay PoE subsystem (System and PoE Power supplies ordered separately)
S8-Chassis-POE8
S-Series S8 Chassis and fan trays with 8 bay PoE subsystem (System and PoE Power supplies ordered separately)
S8-POE-8BAY-UGK
S-Series 8 bay PoE upgrade kit for the S8 (PoE Power supplies ordered separately)
S8-POE-4BAY-UGK
S-Series 4 bay PoE upgrade kit for the S8 (PoE Power supplies ordered separately)
S8-Midmount-Kit
S-Series S8 Chassis 19” midmount installation rack kit, can be used with all S8 chassis types
S6 Chassis
S6-Chassis
S-Series S6 Chassis and fan trays. Front to back cooling. (Power supplies ordered separately)
S6-Chassis-POE4
S-Series S6 Chassis and fan tray with 4 bay POE subsystem. Front to back cooling. (System and POE power supplies ordered separately)
S6-Midmount-Kit
S-Series S6 Chassis 19” midmount installation rack kit, can be used with all S6 chassis types
S6-FAN
S-Series Fan Tray (For use w/ S6)
S4 Chassis
S4-Chassis
S-Series S4 Chassis and fan tray (Power supplies added separately)
S4-Chassis-POE4
S-Series S4 Chassis and fan tray with 4 bay PoE subsystem (System and PoE Power supplies ordered separately)
S4-POE-4BAY-UGK
S-Series 4 bay PoE upgrade kit for the S4 (PoE Power supplies ordered separately)
S4-Midmount-Kit
S-Series S4 Chassis 19" midmount installation rack kit, can be used with all S4 chassis types
S3 Chassis
S3-Chassis-A
S-Series S3 Chassis(A) and fan tray (Power supplies ordered separately)
S3-Chassis-POEA
S-Series S3 Chassis(A) and fan tray with 4 bay POE subsystem (System and POE power supplies ordered separately)
S3-POE-4BAY-UGK
S-Series 4 bay PoE upgrade kit for the S3 (PoE Power supplies ordered separately)
S3-Midmount-Kit
S-Series S3 Chassis 19" midmount installation rack kit, can be used with all S3 chassis types