Specifications

Startup and General Configuration Summary
Setting Basic Device Properties
2-58 SecureStack A2 Configuration Guide
2.1.12.8 set system enhancedbuffermode
Use this command to enable or disable enhanced buffer mode, which optimizes buffer distribution
for non-stacking single CoS queue operation. Executing this command will reset the switch, so the
system prompts you to confirm whether you want to proceed.
set system enhancedbuffermode {enable | disable}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to enable enhanced buffer mode:
enable | disable Enables or disables enhanced buffer mode.
A2(su)->set system enhancedbuffermode enable
Changes in the enhanced buffer mode will require reseting this unit.
Are you sure you want to continue? (y/n)